SHOTOVER U1 - Pre-owned - SOLD

Sale Price:$49,999.00 Original Price:$125,000.00
sale

Certified Pre-Owned SHOTOVER U1

System Specs

Gimbal communication

• sUAS communication

• Camera communication

Dimensions

• Height: 894mm

• Width: 979mm (without props),

1668.5mm (with props)

Wingspan: 1385mm (without props)

2083.5mm (with props)

Flight Time

• 9-22min *dependent on setup

Power

• 500 Amps Max Draw (at 44V)

Maximum Battery Length

• 190mm

Operating Temperature

-20 to +50 °C (-4 to 122 °F)

Weight

• Empty weight (without batteries): 11kg

• Payload weight: Max 12kg

Total weight: 34kg

Main FC - Cube

• 150 mips RISC processor

Fully integrated with 3-axis gyros/ accelerometers,

GPS, pressure altimeter, pressure airspeed

Extensive data logging and telemetry

• Software upgradable in the field

• Redundant datalinks to ground control station

Redundant FC - 3DR Pixhawk

• Advanced 32-bit ARM Cortex® M4 Processor

running NuttX RTOS

Integrated with 3-axis gyros / accelerometers /

magnetometer, barometer

• MicroSD card for long-time high-rate logging

• 14 PWM/servo outputs (8 with failsafe and manual

override, 6 auxiliary)

Motors

• Co-axial custom motor design

Two KDE 7215XF motors per rotor arm.

Kv: 135 RPM/V

• Maximum Continuous Current: 85+A (180 s)

Maximum Continuous Power: 4405+W (180 s)

Voltage Range: 50V (12S) (44V nominal)

Weight: 555 g (640 g with wires/bullets)

Maximum Thrust Output: 142.98 N

Maximum Power Input: 2581 W

• RPM: 4775 rev/min

* Notes:

a) These values are drawn from KDE and are obtained

under their specific testing conditions.

b) Each motor can be controlled independently

allowing for control of each prop independently

Overall Specifications:

• Maximum Thrust: 1143 N or 380% lift power.

Maximum Power Input: 20.648 kW

Type: Direct connection

Motor Fixation: Rigid

Diameter of the Fittings: 3mm (M3)

Propellers

Model: KDE-CF275-DP

Type: Rigid

Number of blades: 16

Diameter: 27.5 inches

• Pitch: 8.9 degrees

Blade Material: Carbon Fibre

Hub Material: Aluminium

• Manufacturer: KDE

Fittings :4 type M3 x 8mm

Quantity:
Add To Cart

Certified Pre-Owned SHOTOVER U1

System Specs

Gimbal communication

• sUAS communication

• Camera communication

Dimensions

• Height: 894mm

• Width: 979mm (without props),

1668.5mm (with props)

Wingspan: 1385mm (without props)

2083.5mm (with props)

Flight Time

• 9-22min *dependent on setup

Power

• 500 Amps Max Draw (at 44V)

Maximum Battery Length

• 190mm

Operating Temperature

-20 to +50 °C (-4 to 122 °F)

Weight

• Empty weight (without batteries): 11kg

• Payload weight: Max 12kg

Total weight: 34kg

Main FC - Cube

• 150 mips RISC processor

Fully integrated with 3-axis gyros/ accelerometers,

GPS, pressure altimeter, pressure airspeed

Extensive data logging and telemetry

• Software upgradable in the field

• Redundant datalinks to ground control station

Redundant FC - 3DR Pixhawk

• Advanced 32-bit ARM Cortex® M4 Processor

running NuttX RTOS

Integrated with 3-axis gyros / accelerometers /

magnetometer, barometer

• MicroSD card for long-time high-rate logging

• 14 PWM/servo outputs (8 with failsafe and manual

override, 6 auxiliary)

Motors

• Co-axial custom motor design

Two KDE 7215XF motors per rotor arm.

Kv: 135 RPM/V

• Maximum Continuous Current: 85+A (180 s)

Maximum Continuous Power: 4405+W (180 s)

Voltage Range: 50V (12S) (44V nominal)

Weight: 555 g (640 g with wires/bullets)

Maximum Thrust Output: 142.98 N

Maximum Power Input: 2581 W

• RPM: 4775 rev/min

* Notes:

a) These values are drawn from KDE and are obtained

under their specific testing conditions.

b) Each motor can be controlled independently

allowing for control of each prop independently

Overall Specifications:

• Maximum Thrust: 1143 N or 380% lift power.

Maximum Power Input: 20.648 kW

Type: Direct connection

Motor Fixation: Rigid

Diameter of the Fittings: 3mm (M3)

Propellers

Model: KDE-CF275-DP

Type: Rigid

Number of blades: 16

Diameter: 27.5 inches

• Pitch: 8.9 degrees

Blade Material: Carbon Fibre

Hub Material: Aluminium

• Manufacturer: KDE

Fittings :4 type M3 x 8mm

Certified Pre-Owned SHOTOVER U1

System Specs

Gimbal communication

• sUAS communication

• Camera communication

Dimensions

• Height: 894mm

• Width: 979mm (without props),

1668.5mm (with props)

Wingspan: 1385mm (without props)

2083.5mm (with props)

Flight Time

• 9-22min *dependent on setup

Power

• 500 Amps Max Draw (at 44V)

Maximum Battery Length

• 190mm

Operating Temperature

-20 to +50 °C (-4 to 122 °F)

Weight

• Empty weight (without batteries): 11kg

• Payload weight: Max 12kg

Total weight: 34kg

Main FC - Cube

• 150 mips RISC processor

Fully integrated with 3-axis gyros/ accelerometers,

GPS, pressure altimeter, pressure airspeed

Extensive data logging and telemetry

• Software upgradable in the field

• Redundant datalinks to ground control station

Redundant FC - 3DR Pixhawk

• Advanced 32-bit ARM Cortex® M4 Processor

running NuttX RTOS

Integrated with 3-axis gyros / accelerometers /

magnetometer, barometer

• MicroSD card for long-time high-rate logging

• 14 PWM/servo outputs (8 with failsafe and manual

override, 6 auxiliary)

Motors

• Co-axial custom motor design

Two KDE 7215XF motors per rotor arm.

Kv: 135 RPM/V

• Maximum Continuous Current: 85+A (180 s)

Maximum Continuous Power: 4405+W (180 s)

Voltage Range: 50V (12S) (44V nominal)

Weight: 555 g (640 g with wires/bullets)

Maximum Thrust Output: 142.98 N

Maximum Power Input: 2581 W

• RPM: 4775 rev/min

* Notes:

a) These values are drawn from KDE and are obtained

under their specific testing conditions.

b) Each motor can be controlled independently

allowing for control of each prop independently

Overall Specifications:

• Maximum Thrust: 1143 N or 380% lift power.

Maximum Power Input: 20.648 kW

Type: Direct connection

Motor Fixation: Rigid

Diameter of the Fittings: 3mm (M3)

Propellers

Model: KDE-CF275-DP

Type: Rigid

Number of blades: 16

Diameter: 27.5 inches

• Pitch: 8.9 degrees

Blade Material: Carbon Fibre

Hub Material: Aluminium

• Manufacturer: KDE

Fittings :4 type M3 x 8mm